GATE CONTAINERS
Design elements and technical aspects
DISCHARGE CATCH
It is one of the most important parts of the skip, only strict inspection and professional workmanship guarantees trouble-free use. In all our skips, the discharge catch is welded to the inside, this assembly method prevents it from being bent or detached from the structure. Single or triple, one-sided or double-sided, to choose from.
PINS AND STACKING BEAM
The pins are the most important part of the container, so for our SKIPS we use pins cast of high quality steel, welded on both sides with a reinforcing plate inside, guaranteeing safety and failure-free operation. For the stacking (retaining) beam, we use a flat metal bar with a minimum thickness of 5 mm or an angle bar.
INNER AND OUTER REINFORCEMENTS
The pins are the most important part of the container, so for our SKIPS we use pins cast of high quality steel, welded on both sides with a reinforcing plate inside, guaranteeing safety and failure-free operation. For the stacking (retaining) beam, we use a flat metal bar with a minimum thickness of 5 mm or an angle bar.
HINGES AND CLOSING DEVICES FOR LIDS
Containers with lids or an inrun hatch require heavy-duty movable elements, so that only elements of highest quality guarantee long-term trouble-free use.
TARPAULIN HOLDERS AND LACQUERING
We are the only company that installs in the containers double hooks (hook and lug) cut from steel, designed in such a way that they are resistant to damage and deformation. Two ways of attaching the tarpaulin guarantee safety during the transport of waste. For lacquering our SKIPS, we use alkyd paints of an Italian manufacturer, anti-corrosion primer and topcoat of any colour from the RAL palette. The hydrodynamic painting system guarantees coating with appropriate thickness and resistance to damage.
Asymmetric open skip DIN 30720 / 30720-1
Container configuration
- Bottom made of sheet metal, 4mm, 5mm or 6mm, optionally with or without holes.
- Walls made of sheet metal, 3mm or 4mm.
- C-shaped beam 80x40x4mm.
- Box channel 80x40x4mm on the discharge wall.
- Stacking beam, flat metal bar 100x6mm or Angle bar 100x50x6mm.
- Forged detent pins dia 45.
- Discharge catch single or triple shaft dia 45.
- Set of bottom and wall reinforcements.
- Sheet metal angles 4mm on the corners.
- Reinforcement of the C-profile connections.
- Mounting of transportation corner gussets possible.
- Mounting of reinforcing channels on the discharge walls possible.
- Securing net holders hook and eyelet.
Asymmetric open skip with inrun hatch DIN 30720 / 30720-1
Container configuration
- Bottom made of sheet metal, 4mm, 5mm or 6mm, optionally with or without holes.
- Walls made of sheet metal, 3mm or 4mm.
- C-shaped beam 80x40x4mm.
- Box channel 80x40x4mm on the emptying wall.
- Stacking beam, flat metal bar 100x6mm or Angle bar 100x50x6mm.
- Forged detent pins dia 45.
- Discharge catch single or triple shaft dia 45.
- Set of bottom and wall reinforcements.
- Sheet metal angles 4mm on the corners.
- Reinforcement of the C-profile connections.
- Mounting of transportation corner gussets possible.
- Mounting of reinforcing channels on the discharge walls possible.
- Securing net holders hook and eyelet.
Symmetric open skip with lids DIN 30720 / 30720-1
Container configuration
- Bottom made of sheet metal, 4mm, 5mm or 6mm, optionally with or without holes.
- Walls made of sheet metal, 3mm or 4mm.
- C-shaped beam 80x40x4mm.
- Box channel 80x40x4mm on the emptying wall.
- Stacking beam, flat metal bar 100x6mm or Angle bar 100x50x6mm.
- Forged detent pins dia 45.
- Discharge catch single or triple shaft dia 45.
- Set of bottom and wall reinforcements.
- Sheet metal angles 4mm on the corners.
- Lids made of 2mm sheet metal on a frame made of channels.
- Two eccentric locks for each lid.
- Automatic lifting system.
Symmetric open skip DIN 30720 / 30720-1
Container configuration
- Bottom made of sheet metal, 4mm, 5mm or 6mm, optionally with or without holes.
- Walls made of sheet metal, 3mm or 4mm.
- C-shaped beam 80x40x4mm.
- Box channel 80x40x4mm on the emptying wall.
- Stacking beam, flat metal bar 100x6mm or Angle bar 100x50x6mm.
- Forged detent pins dia 45.
- Discharge catch single or triple shaft dia 45.
- Set of bottom and wall reinforcements.
- Sheet metal angles 4mm on the corners.
- Additional reinforcing channel on the discharge walls.
- Securing net holders hook and eyelet.
Asymmetric open multicar
Container configuration
- Bottom made of sheet metal, 3mm or 4mm, optionally with or without holes.
- Walls made of sheet metal, 3mm or 4mm.
- C-shaped beam 50x30x3mm.
- Box channel 50x30x3mm on the discharge wall.
- Stacking beam, flat metal bar 70x5mm.
- Detent pins dia 30.
- Discharge catch single or triple shaft dia 30.
- Set of bottom and wall reinforcements.
- Sheet metal angles 4mm on the corners.
- Mounting of transportation corner gussets possible.
- Mounting of reinforcing channels on the discharge walls possible.
- Securing net holders hook and eyelet.
Asymmetric open multicar with an inrun hatch
Container configuration
- Bottom made of sheet metal, 3mm or 4mm, optionally with or without holes.
- Walls made of sheet metal, 3mm or 4mm.
- C-shaped beam 50x30x3mm.
- Box channel 50x30x4mm on the discharge reinforcement.
- Stacking beam, flat metal bar 70x5mm.
- Detent pins dia 30.
- Discharge catch single or triple shaft dia 30.
- Set of bottom and wall reinforcements.
- Sheet metal angles 4mm on the corners.
- Mounting of transportation corner gussets possible.
- Inrun hatch hinges dia 32.
- Double side lock of the inrun hatch.
- Securing net holders hook and eyelet.
Symmetric multicar with lids
Container configuration
- Bottom made of sheet metal, 3mm or 4mm, optionally with or without holes.
- Walls made of sheet metal, 3mm or 4mm.
- C-shaped beam 50x30x3mm.
- Box channel 50x30x3mm on the emptying wall.
- Stacking beam, flat metal bar 70x5mm.
- Detent pins dia 30.
- Discharge catch single or triple shaft dia 30.
- Set of bottom and wall reinforcements.
- Sheet metal angles 4mm on the corners.
- Lids made of 2mm sheet metal on a frame made of channels.
- Two eccentric locks for each lid.
- Automatic lifting system.
Symmetric open multicar
Container configuration
- Bottom made of sheet metal, 3mm or 4mm, optionally with or without holes.
- Walls made of sheet metal, 3mm or 4mm.
- C-shaped beam 50x30x3mm.
- Box channel 50x30x4mm on the discharge wall.
- Stacking beam, flat metal bar 70x5mm.
- Detent pins dia 30.
- Discharge catch single or triple shaft dia 30.
- Set of bottom and wall reinforcements.
- Sheet metal angles 4mm on the corners.
- Additional reinforcing channel on the discharge walls.
- Mounting of lifting eyes for crane operation possible.
- Securing net holders hook and eyelet.
